Figure 4.7 Gsm Rover Menu - Thales Z-Max Operation And Application Manual

Transmit frequency. (TX: *.**)
Displays the transmit frequency in MHz. This field will display the transmit
frequency matched to the channel number (CHN) parameter.
Send user selected radio parameters to the receiver. (PROGRAM)
Press the ENTER key to load your selected radio parameters (channel,
sensitivity, link speed) to the receiver. Any errors in sending the parameters
will trigger a message that will be displayed on the front panel.
Power off the radio. (PWR OFF)
This is NOT a power status indication for the radio, but a function to turn off
the radio Communication Module. The Port must be set to D before entering
this field. Press the ENTER key to power off the PDL radio.
COM OPTN: GSM ROVER
The GSM Rover menu is shown in Figure 4.7.
GSM
ROVER
74
ENTER
SETUP
DIAL
HANG UP
CANCEL
PWR
STATE

Figure 4.7 GSM Rover Menu

Z-Max Surveying System Operation and Applications Manual
Symbology:
Thin arrow - Enter or Cancel Key
Thick Arrow - Up or Down Key
MODE
BAND
PHONE
PIN
RETRY