Configuration Of The Load Controller; Selection Of Operating Mode - Siemens LMV51 Series Basic Documentation

Selection of operating
mode
Menu level 1 Menu level 2
Params & Display
SystemConfig
Menu level 1
Params & Display
Menu level 1
Params & Display
Menu level 1
Params & Display
Siemens Building Technologies
HVAC Products

8.1.5 Configuration of the load controller

→ «Operating modes with the load controller»
Example: Internal load controller with Pt1000 sensor.
Menu level 3
LC_OptgMode
Or, alternatively:
Menu level 2 Menu level 3
LoadController
Configuration
After the internal load controller has been activated, the sensor input must be selected
and configured.
Menu level 2 Menu level 3
LoadController
Configuration
Then, the temperature measuring range must be defined.
Menu level 2 Menu level 3
LoadController
Configuration
Basic Documentation LMV5...
8 Commissioning instructions for the LMV5... system
Menu level 4 Menu level 5
ExtLC X5-03
Int LC
Int LC Bus
Int LC X62
Ext LC X62
Ext LC Bus
Menu level 4 Menu level 5
LC_OptgMode
ExtLC X5-03
Int LC
Int LC Bus
Int LC X62
Ext LC X62
Ext LC Bus
Menu level 4 Menu level 5
SensorSelection
Pt100
Pt1000
Ni1000
TempSensor
PressSensor
Pt100Pt1000
Pt100Ni1000
NoSensor
Menu level 4 Menu level 5
MeasureRange PtNi
150°C/302°F
400°C/752°F
Menu level 6
Menu level 6
Menu level 6
Menu level 6
165/301
CC1P7550en
13.08.2004