Resistor Module (Machines With Two−Post Rops Extension Operator Fan Kit) - Toro Groundsmaster 5900 Series Service Manual

Resistor Module (Machines with Two−Post ROPS Extension
Operator Fan Kit)
g288625
1. Operator's fan
Testing
Electrical System: Component Testing
1 2
2. Fan mount bracket
The resistor module is attached to the rear of the fan mounting bracket
277). The resistor module is used for operation of the operator's fan.
1. Park the machine on a level surface, lower the cutting decks, and shut off
the engine. Remove the key from the key switch.
2. To access the resistor, remove the sunshade from the top of the ROPS
extension.
3. Disconnect the wire harness connectors from the resistor module terminals.
g288626
1. Pin 1 (Violet wire)
2. Pin 2 (Brown wire)
3. Pin 3 (Orange wire)
3
Figure 277
6
Figure 278
4. Pin 4 (Not used)
5. Motor pin
6. Resistor module
Page 6–136
3. Resistor module
5
4
2
3
1
2
1
Groundsmaster
16227SL Rev B
(Figure
® 5900 & 5910