Toro Groundsmaster 5900 Series Service Manual page 460

Operator Seat Suspension Assembly
Chassis: Service and Repairs
(Figure
1. If previously removed, install lower seat suspension to seat platform as
follows (Figure 320):
A. If removed, install mounting screws and secure with retaining washers.
B. Position seat suspension onto seat platform.
C. Secure lower seat suspension to seat platform with four (4) screws and
flange nuts. Tighten flange nuts from 41 to 49 N·m (30 to 36 ft−lb).
D. Move fuel tank back into position and install (see
(page 4–19)). Make sure that fuel tank and front wheel are properly
secured.
2. Install all removed seat suspension components.
3. Install operator seat to seat suspension (see
4. Make sure that seat electrical connectors are secured to machine wire
harness.
319)
Page 7–46
Fuel Tank Installation
Operator Seat (page 7–40)).
Groundsmaster ® 5900 & 5910
16227SL Rev B