Toro Groundsmaster 5900 Series Service Manual page 313

Hide thumbs Also See for Groundsmaster 5900 Series:
Table of Contents

Advertisement

Traction Pedal Position Sensor Calibration
Groundsmaster
®
5900 & 5910
16227SL Rev B
g288436
1.
Button 1
2.
Button 2
3.
Button 3
Calibration of the traction pedal position sensor ensures that the Toro Electronic
Controller (TEC) can identify the traction neutral, forward, full forward, reverse
and full reverse positions. Make sure the traction pedal neutral position is
properly adjusted before calibrating the traction pedal position sensor (see
Traction Pedal Neutral Adjustment (page
1. Park machine on a level surface, lower cutting decks and stop engine.
2. Turn key switch to RUN but do not start engine.
3. Access the InfoCenter Display Settings screen (see InfoCenter Display −
Settings Screens (page
(PIN) may be required to access the screens.
4. Access the Traction Pedal screen and press button 1 to begin the calibration
process
(Figure
193).
5. Follow the prompts on the InfoCenter display screen to calibrate the traction
pedal position sensor or cancel the calibration process and return to the
previous screen if necessary by pressing button 5.
The calibration steps are listed in order below:
A. "Entered Traction Pedal Teach − Please Wait" should appear on the
InfoCenter display to indicate the traction pedal calibration process has
begun.
B. Return the traction pedal to the neutral position.
Note: It may be easier to perform the following step by operating the
traction pedal by hand.
C. Slowly press traction pedal in the forward direction until "Neutral Fwd
Capture Passed" appears on the InfoCenter display.
D. Continue to press and hold traction pedal to the full forward position until
"Max Fwd Capture Passed" appears on the InfoCenter display.
E. Allow traction pedal to return to the neutral position.
Note: It may be easier to perform the following step by operating the
traction pedal by hand.
1
3
2
4
Figure 193
4.
Button 4
5.
Button 5
6.
Traction pedal screen
6–49)).
6–35)). Entering a Personal Identification Number
Page 6–51
6
5
Electrical System: Adjustments

Advertisement

Table of Contents
loading

This manual is also suitable for:

Groundsmaster 5910 series

Table of Contents