Rear Axle Installation
Chassis: Service and Repairs
(Figure
294) (continued)
7. Check oil level in hydraulic reservoir and add if necessary (see machine
Operator's Manual).
8. Lubricate the rear axle pivot bushings and spindle pivot bushings through
the grease fittings provided.
9. Check rear wheel toe−in and adjust as necessary (see machine Operator's
Manual).
10. Check to make sure that no contact is made between any machine
components (including hydraulic hoses) as the rear wheels are moved from
steering lock to steering lock. Correct any interference as necessary.
11. Operate machine and check hydraulic connections at steering cylinders and
wheel motors for leaks.
Page 7–12
Groundsmaster
®
5900 & 5910
16227SL Rev B