1
2 (T7)
8 (T3)
g288215
1.
Manifold block
2.
Pressure compensator − LC
3.
#8 zero leak plug with O−ring (4)
4.
#4 zero leak plug with O−ring (12)
Hydraulic System: Service and Repairs
3 (T6)
4 (T3)
5 (T4)
5 (T4)
10 (T3)
9
4 (T3)
5.
#6 zero leak plug with O−ring (6)
6.
#10 zero leak plug with O−ring
7.
Check valve − CV2
8.
#4 zero leak plug with O−ring (2)
The ports on the lift control manifold are marked for easy identification of
components. Example: P1 is the supply port from the gear pump and S1 is the
location for solenoid valve #1 (see
the function of the hydraulic lines and cartridge valves at each port).
Although not recommended in most situations, relief valve RV1, RV2 and RV3
are adjustable (see
Adjust Manifold Relief Valves (page
5 (T4)
4 (T3)
Figure 133
10.
11.
A Hydraulic Schematic (page A–3)
Page 5–156
4 (T3)
4 (T3)
6 (T7)
7 (T3)
4 (T3)
3 (T6)
11 (T4)
3 (T6)
4 (T3)
5 (T4)
11 (T4)
9.
Orifice − 0.055 in OR2 and OR6
Check valve − CV3
#6 zero leak plug with O−ring (2)
5–72)).
Groundsmaster
16227SL Rev B
to identify
®
5900 & 5910