Front Wheel Motors - Toro Groundsmaster 5900 Series Service Manual

Front Wheel Motors

g287959
1. Front wheel motor
2. Hydraulic straight fitting
Front Wheel Motor Removal
Hydraulic System: Service and Repairs
3. Hydraulic straight fitting (2)
4. Hydraulic straight fitting
(Figure 91)
1. Park machine on a level surface, lower cutting decks fully, disengage PTO
and stop engine. Remove key from key switch.
The front wheel motors on Groundsmaster 5900 and 5910 machines
look identical but contain unique internal components for right side
and left side application. To avoid interchanging front wheel motors
on machine, label front wheel motors RIGHT and LEFT for assembly
purposes.
2. If removing the left front wheel motor, remove the fuel tank for better access to
the wheel motor hydraulic lines (see
the right front wheel motor, remove the hydraulic reservoir for better access
to the wheel motor hydraulic lines (see
3
5
183 to 224 N·m
(135 to 165 ft−lb)
Figure 91
IMPORTANT
Fuel System (page
Hydraulic Reservoir (page
Page 5–100
6
5. Hydraulic elbow fitting
6. Cap screw (8)
4–17)). If removing
Groundsmaster
16227SL Rev B
4
3
2
1
5–83)).
® 5900 & 5910