Toro Groundsmaster 5900 Series Service Manual page 496

Removal (Figure 342)
Installation (Figure
Operator Cab : Service and Repairs
1. Park machine on a level surface, lower cutting decks and stop engine.
Remove key from the key switch.
2. Release swell latches and lift condenser screen (item 3) from roof assembly.
3. Remove flange head screws that secure condenser seals (items 5, 6, 7 and
8) to roof and A/C condenser assembly.
4. Remove shoulder screws, washers and flange nuts that secure the roof and
cab straps to the headliner.
5. Carefully lift roof from headliner and cab.
342)
1. Make sure that all components in headliner are installed and secure.
2. Position roof onto headliner. Make sure that all roof mounting holes are
properly aligned with headliner and A/C condenser assembly.
3. Secure roof to headliner with removed shoulder screws, flat washers, cab
straps and flange nuts.
4. Secure condenser seals to roof and A/C condenser assembly with removed
flange head screws.
5. Install and secure A/C screen to roof assembly with swell latches.
Page 9–10 Groundsmaster ® 5900 & 5910
16227SL Rev B