Toro Groundsmaster 5900 Series Service Manual page 503

Removal (Figure 348) (continued)
Groundsmaster ® 5900 & 5910
16227SL Rev B
4. Read the General Precautions for Removing and Installing Air Conditioning
System Components (page
The air conditioning system is under high pressure. Do not loosen
any system fitting or component until after the system has been
completely discharged by a certified A/C service technician.
5. Have refrigerant evacuated from air conditioning system by a certified A/C
service technician.
6. Label and disconnect hoses from condenser core. Immediately cap hoses
and fittings to prevent moisture and contaminants from entering the system.
7. Remove four (4) flange nuts that secure A/C condenser assembly to cab
frame.
8. Carefully raise condenser assembly from headliner and remove from
machine.
g299874
1. Condenser core
2. Lower leg (2)
3. Hex nut (6)
4. Front wall
5. Back wall
6. Right side wall
9. Inspect seals (items 7 and 8 in
or damage and replace if needed.
10. If necessary, disassemble condenser assembly using
Inspect seals on top of condenser assembly walls (items 8 and 9 in
349) for wear or damage and replace if needed.
9–4).
CAUTION
Figure 349
7. Left side wall
8. Strip seal (2)
9. Edge seal (2)
10. Screw (12)
11. Clip (16)
Figure 348) on top of cab frame for wear
Page 9–17
Figure 349 as a guide.
Figure
Operator Cab : Service and Repairs