Toro Groundsmaster 5900 Series Service Manual page 303

SPEED LIMITS (continued)
About Screens
Groundsmaster ® 5900 & 5910
16227SL Rev B
Adjust the speed limit by pressing buttons 1 or 2 (− or +)
Return to the previous screen by pressing button 5.
MODEL NUMBER:
SERIAL NUMBER:
SW VERSION:
CHECKSUM:
PART NUMBER:
SERIAL NUMBER:
MODEL NUMBER:
SERIAL NUMBER:
ECM SERIAL:
PRODUCT ID:
g288345
The About screens provide information about the machine, the InfoCenter
Display, the two (2) Toro Electronic Controllers (TECs) and the Yanmar Engine
Control Unit (ECU). The About screens
main menu.
Access the various settings screens by pressing buttons 1 or 2 to highlight the
desired screen and button 4 to select the highlighted screen. Scroll through the
various about screens by pressing buttons 1 or 2.
Return to the previous screen by pressing button 5.
Note: The TEC controllers and the InfoCenter Display software is matched for
correct machine operation. If any of these components are replaced for any
reason, system software needs to be reloaded (contact your Authorized Toro
Distributor).
31698
316000101
CE MODE: OFF
CHECKSUM:
PART NUMBER:
SERIAL NUMBER:
122−0311 B SW VERSION:
DATE: 12−18−2015
TIME: 15:40
0x2D1E
114−3321 PART NUMBER:
00012345 SERIAL NUMBER:
31698 MODEL NUMBER:
316000101 SERIAL NUMBER:
SOURCE: YDECO
ECM ID: N/A
N/A
ECM PART: N/A
N/A
Figure 182
(Figure
Page 6–41
(Figure 181).
VERSION: A1
DATE: 12−16−2015
TIME: 13:23
0x258A −OK
LIB ID: 01.06
KAntrak 2700
−0001234
EE Writes: 1234
122−0312 B
DATE: 12−18−2015
TIME: 15:40
CHECKSUM: 0XFEE0
114−3321
00012345
31698
316000101
182) are accessed from the
Electrical System: InfoCenter Display