Toro Groundsmaster 5900 Series Service Manual page 210

g288016
1. Manifold block
2. Straight fitting (7)
3. Straight fitting
4. Straight fitting (2)
Traction Control Manifold Removal
Hydraulic System: Service and Repairs
1
5. Straight fitting
6. Dust cap
7. Diagnostic fitting
8. Elbow fitting
(Figure
1. Read the General Precautions for Removing and Installing Hydraulic System
Components (page
2. To prevent contamination of hydraulic system during manifold removal,
thoroughly clean exterior of manifold and fittings.
3. Disconnect wire harness connector from the solenoid valve and the
temperature sender.
4. Disconnect all hydraulic lines from manifold and put caps or plugs on
open hydraulic lines and fittings to prevent system contamination. Label
disconnected hydraulic lines for proper assembly.
1
Figure 99
10.
98)
5–73).
Page 5–110
6
9. Elbow fitting (2)
Elbow fitting
Groundsmaster
16227SL Rev B
® 5900 & 5910