Fuel Lines, Filters and Fuel Pump Removal (continued)
Fuel Lines, Filters and Fuel Pump Installation
Groundsmaster
®
5900 & 5910
16227SL Rev B
4. Remove fuel system components from the engine as necessary.
Note: See
Fuel Pump (page 6–111)
See machine Operator's Manual for fuel/water separator and fuel filter service
information.
1. Install removed system components
2. If barb fittings were removed from fuel/water separator head, apply thread
sealant to fittings prior to installation.
3. Add fuel to the tank and prime the fuel system (see
(page
4–18)). Check fuel system for leaks before returning the machine to
service.
4. Install and secure side panel to left side of machine.
5. Lower and secure hood.
testing information.
(Figure
Page 4–21
Yanmar Diesel Engine: Service and Repairs
21).
Prime the Fuel System