Toro Groundsmaster 5900 Series Service Manual page 314

Traction Pedal Position Sensor Calibration (continued)
Electrical System: Adjustments
F. Slowly press traction pedal in the reverse direction until "Neutral Rev
Capture Passed" appears on the InfoCenter display.
G. Continue to press and hold traction pedal to the full reverse position until
"Max Rev Capture Passed" appears on the InfoCenter display.
H. Allow traction pedal to return to the neutral position.
I. "Exit Teach: Traction Pedal Teach Done/Values Stored" should appear on
the InfoCenter display to indicate a successful calibration process.
6. Turn key switch to OFF which exits the traction pedal calibration menu.
Page 6–52 Groundsmaster ® 5900 & 5910
16227SL Rev B