FUEL LEVEL
TRACTION PEDAL
TO RAISE DECK
Troubleshooting:
The FUEL LEVEL advisory identifies that the fuel remaining in the tank is low.
#1302 LOW ADD
Less than 5 gallons of fuel remain in the fuel tank.
FUEL:
The TRACTION PEDAL advisory identifies an inaccurate or inconsistent signal
from the traction pedal position sensor.
#1402
The traction pedal position sensor needs to be calibrated (see
CALIBRATE:
Pedal Position Sensor Calibration (page
The TO RAISE DECK advisory identifies that the cutting deck will not raise when
a raise deck switch is pressed.
#1602 OPERATOR
Operator needs to be in seat before cutting decks will raise.
MUST BE
SEATED:
#1603 SET
If the operator is not in the seat, the parking brake switch needs to be in
PARKING BRAKE:
the engaged position and the traction pedal needs to be in neutral before
cutting decks will raise.
#1604 RETURN
If the operator is not in the seat, the traction pedal needs to be in the
TRACTION PEDAL
neutral position and the parking brake must be engaged before cutting
TO NEUTRAL:
decks will raise.
#1605 REQUIRES
The slave Toro Electronic Controller is inoperable due to CAN
SERVICE:
communication issues or an internal controller fault.
Page 3–20
Traction
6–51)).
Groundsmaster
®
5900 & 5910
16227SL Rev B