Battery Removal (continued)
Battery Installation
Electrical System: Service and Repairs
2
9
8
3
g288672
1.
Battery cover
2.
Battery−disconnect switch
3.
Batteries − 12 volt for 12 VDC system) (2)
4.
Batteries − 12 volt for 24 VDC system) (2)
5.
Positive (+) cable (for 12 VDC system)
1. Secure batteries with hold downs.
2. Install battery cables.
3. Position battery cover in place and secure with removed fasteners.
4. Install rear shroud
5. Install side shrouds
6. Raise rear bumper into position and install flange head screws. Tighten all
flange head screws securing rear bumper to frame
7. Turn the battery−disconnect switch to the ON position before returning the
machine to service.
1
5
6
Figure 282
6.
Cable assembly (for 24 VDC system)
7.
Cable − jumper (for 24 VDC system)
8.
Ground (−) cable
9.
Battery hold down (2)
10.
Battery hold down (2)
(Figure
281).
(Figure
280).
Page 6–142
7
10
4
(Figure
279).
Groundsmaster
®
5900 & 5910
16227SL Rev B