Testing (continued)
Groundsmaster
®
5900 & 5910
16227SL Rev B
Terminals
1 + 3
6 + 3
4 + 3
6. After testing is complete, make sure that voltage divider is fully inserted into
wire harness connector.
7. If the voltage divider tests correctly and a circuit problem still exists, check
the wire harness (see
8. Turn the battery−disconnect switch to the ON position before returning the
machine to service.
Appendix A (page
A–1)).
Page 6–133
Resistor
R1 − 12K (12,000) ohms
R2 − 2K (2,000) ohms
R3 − 2K (2,000) ohms
Electrical System: Component Testing