Toro Groundsmaster 5900 Series Service Manual page 476

Blade Spindles
g299689
1. Driven spindle (double pulley)
2. Drive spindle
Blade Spindle Removal
Cutting Decks: Service and Repairs
1. Park machine on a level surface, lower cutting decks, stop engine and
remove key from the key switch.
2. Remove covers from cutting deck to allow access to blade spindle.
3. If drive spindle is to be serviced, record motor orientation and remove
hydraulic motor from cutting deck. See
additional information. Position motor away from spindle.
4. Use a ⅜" or ½" drive ratchet or breaker bar to relieve idler pulley tension and
remove drive belt(s) from spindle to be serviced.
Figure 331
3. Driven spindle (high pulley)
4. Grease fitting
Cutting Deck Motor (page 5–118)
Page 8–14
for
Groundsmaster ® 5900 & 5910
16227SL Rev B