Toro Groundsmaster 5900 Series Service Manual page 178

Flush Hydraulic System (continued)
Hydraulic System: Service and Repairs
8. Fill hydraulic reservoir with new hydraulic fluid.
9. Prime hydraulic pumps (see
10. Charge the hydraulic system (see
11. Check condition of hydraulic oil. If the new fluid shows any signs of
contamination, repeat steps
12. Assume normal operation and follow recommended maintenance intervals.
Priming Hydraulic Pumps (page
Charge Hydraulic System (page
1 through 11 again until oil is clean.
Page 5–78
5–76)).
5–79)).
Groundsmaster ® 5900 & 5910
16227SL Rev B