Toro Groundsmaster 5900 Series Service Manual page 310

Adjustment (continued)
Electrical System: Adjustments
2
g288432
1. Wing deck lift arm
2. Position switch
5. For machine serial numbers below 316000200 adjust the wing deck switches
as follows (Figure 189):
A. Raise the wing deck to a 12 degree angle and safely support the deck to
prevent it from lowering during the adjustment procedure.
B. Loosen the lock nut securing the switch to the switch bracket and set
the position switch so the correct clearance exists between the target
eye and the sensing plate.
C. Set the position switch so the sensing eye of the switch is at the upper
edge of the sensing plate. Loosen the sensing plate mounting fasteners
to adjust the plate as needed.
6.3 mm
(0.25 in)
g288433
1. Wing deck lift arm
2. Position switch
3
4
Switch to Sensing Plate Clearance
2.4 to 3.9mm (0.095 to 0.155 in)
Figure 189
3. Switch bracket
4. Sensing plate
2
3
Switch to Sensing Plate Clearance
2.4 to 3.9 mm (0.095 to 0.155 in)
Figure 190
3. Sensing plate
Page 6–48
1
1
Groundsmaster ® 5900 & 5910
16227SL Rev B