Toro Groundsmaster 5900 Series Service Manual page 500

Removal (Figure 345)
Operator Cab : Service and Repairs
g299834
1. Condenser fan (2)
2. Knob (2)
g299835
1. Fan mount plate
2. Screw (4 per fan)
3. Fan tab (4 per fan)
1. Park machine on a level surface, lower cutting decks and stop engine.
Remove key from the key switch.
2. Locate A/C condenser fan assembly which is secured to the frame under
the rear of the cab headliner.
3. Disconnect the two (2) condenser fan plugs from the wire harness connectors
attached to the cab frame
4. Support the condenser fan assembly to prevent it from falling.
5. Remove two (2) knobs that secure condenser fan assembly to machine
(Figure 346).
6. Lower condenser fan assembly from machine.
7. If necessary, disassemble condenser fan assembly using
a guide.
Figure 346
3. Fan plug (2)
Figure 347
4. Condenser fan (2)
5. Plastic plug (3)
(Figure 346).
Page 9–14
Figure 347 as
Groundsmaster ® 5900 & 5910
16227SL Rev B