Toro Groundsmaster 5900 Series Service Manual page 273

Operator Information Screen
Groundsmaster ® 5900 & 5910
16227SL Rev B
6
8
g288304
1. Button 1
2. Button 2
3. Button 3
4. Button 4
The InfoCenter replaces traditional gauges by displaying engine and machine
status. The operator information screen is the default InfoCenter screen and is
displayed when the key switch is in either the RUN or START position. See
the machine Operator's Manual for additional operator information screen
information.
The upper left portion of the screen is used to display any of three (3) different
gauges:
•
Engine coolant temperature and radiator cooling fan speed/direction
•
Engine RPM
•
Electrical systems voltage
The upper right portion of the screen is used to display any of two (2) different
gauges:
•
Hydraulic oil temperature and hydraulic oil cooler fan speed/direction
•
Fuel level
To select the desired gauge, expose the InfoCenter navigation pane by pressing
any button 1, 2, 3 or 4 on the display
pressing buttons 1 or 2 on the display scrolls through the various gauge options.
Note: The navigation pane will automatically close after a short time or it can be
closed manually by pressing button 5 under the open door icon.
The lower portion of the screen is used to display the following conditions (see
machine Operator's Manual):
•
Machine hours
•
Engine RPM
•
Traction speed range
•
Diesel Particulate Filter (DPF) regeneration status
•
Glow plugs (energized)
1 2 3 4
Figure 140
5. Button 5
6. Left gauge screen (coolant temp shown)
7. Right gauge screen (hydraulic oil temp
shown)
8. Fan speed indicator
(Figure 140). From the navigation pane,
Page 6–11
7
8
5
Electrical System: InfoCenter Display