Traction Pedal Assembly
Groundsmaster
®
5900 & 5910
16227SL Rev B
(Figure
314) (continued)
g299132
1.
Traction pedal
2.
Traction pedal shaft
3.
Clamp blocks
F. Clamp blocks
(Figure 315
traction pedal shaft after tightening.
2. Plug machine wire harness connector into traction pedal position sensor.
3. After assembling the traction pedal, calibrate the traction pedal position
sensor (see
Traction Pedal Position Sensor Calibration (page
4. Make sure that hex nut (item 7) is tightened after throttle position sensor
adjustment.
5. Install steering cover (item 1).
Figure 315
4.
Spring shaft
5.
Lock nut
item 3) must be square (at 90º angles) to
Page 7–39
6–51)).
Chassis: Service and Repairs