Toro Groundsmaster 5900 Series Service Manual page 331

Testing (continued)
Groundsmaster ® 5900 & 5910
16227SL Rev B
SWITCH POSITION
STOP
RUN
START
6. Replace key switch if testing determines that it is faulty.
7. If key switch tests correctly and a circuit problem still exists, check the wire
harnesses (see Appendix A (page
8. After testing is complete, connect machine wire harness connector to key
switch.
9. Assemble console arm (see
10. Turn the battery−disconnect switch to the ON position before returning the
machine to service.
Note: Key switch terminals 1 and 6 are connected internally. Terminals 4 and 5
are also connected internally. These terminals should have continuity regardless
of switch position.
A–1)).
Console Arm (page
Page 6–69
CIRCUITS
1 + 6
1 + 3 + 4 + 5 + 6
1 + 2 + 4 + 5 + 6
7–35)).
Electrical System: Component Testing