Toro Groundsmaster 5900 Series Service Manual page 459

Operator Seat Suspension Disassembly
Groundsmaster ® 5900 & 5910
16227SL Rev B
1. Park machine on a level surface, lower cutting decks, stop engine and
remove key from the key switch.
2. Remove operator seat from seat suspension (see
7–40)).
3. Disconnect seat suspension electrical connector from machine wire harness.
4. Remove seat suspension components as needed.
g299320
1. Operator seat assembly
2. Flange nut (4)
3. Screw (4)
5. Remove the lower seat suspension from seat platform as follows
320):
A. To gain access to lower seat suspension mounting screws, slide fuel
tank toward left side of machine (see
Support tank to prevent it from shifting.
B. Remove four (4) flange nuts that secure the lower seat suspension to
seat platform and lift the lower seat suspension from machine. The
four (4) mounting screws and their retaining washers can be removed if
necessary.
(Figure 319) (continued)
Figure 320
4. Retaining washer (4)
5. Seat platform
Fuel Tank Removal (page
Page 7–45
Operator Seat (page
(Figure
4–18)).
Chassis: Service and Repairs