Source Of Monitoring Signal - Lenze i950 Commissioning Manual

Technology application (TA) basic settings
Defining control sources

Source of monitoring signal

6.3.4 Source of monitoring signal
A monitoring signal can be selected for control word 6 and control word 7.
The source for the monitoring signal to be output is selected via the Source for monitoring
signal parameter. The number of decimal positions transferred depends on the value selected.
• Selection for control word 6:
Selection for control word 7:
•
The source for the monitoring signal to be output is selected via the Source for monitoring
signal parameter. The number of decimal positions transferred depends on the value selected.
0x5030:006
Actual motor temperature
Actual motor current
Thermal load device
Termmal load motor
Velocity offset total
Fig. 23: Selection of digital output
Actual motor temperature
Actual motor current
Thermal load device
T her
Velocity offset total
Fig. 24: Selection of digital output
Parameter
Address Name / setting range / [default setting]
0x5040:006 Display value 1
0 None
1 Actual motor temperature
2 Actual motor current
3 DC-bus voltage
4 Device utilisation
5 Motor utilisation
6 Analog input 1
13 Total velocity offset
82
40x5040:006
40x5040:007
(Source onitoring ignal )
None
DC bus voltage
Analog input
(Source onitoring ignal )
None
DC bus voltage
mal load motor
Analog input
0x50 0:006 4
m s 1
0x50 0:116
(Monitoring ignal )
0x50 0:007 4
m s 2
0x50 0: 1 1 7
(Monitoring ignal )
Info
Signal selection for the monitoring of signal 1 to status word 6.
Signal selection for the monitoring of signal 2 to status word 7.
Signal selection for the monitoring of signal 1 to status word 6.
4
s 1
4
s 2