Device Identification - Lenze i950 Commissioning Manual

Address Name / setting range / [default setting]
0x5863:011 Mandatory EtherCAT slaves: Slave 11 is mandatory
• Read only
0 FALSE
1 TRUE
0x5863:012 Mandatory EtherCAT slaves: Slave 12 is mandatory
• Read only
0 FALSE
1 TRUE
0x5863:013 Mandatory EtherCAT slaves: Slave 13 is mandatory
• Read only
0 FALSE
1 TRUE
0x5863:014 Mandatory EtherCAT slaves: Slave 14 is mandatory
• Read only
0 FALSE
1 TRUE
0x5863:015 Mandatory EtherCAT slaves: Slave 15 is mandatory
• Read only
0 FALSE
1 TRUE
0x5864:001 EtherCAT slaves initialisation status: Initalisation sta-
tus slave 1
• Read only
0 No Error
1 No access
2 Vendor ID check failed
3 Product code check failed
4 Revision check failed
0x5865:001 EtherCAT slaves device status: Device status slave 1
• Read only
0 Unknown
1 Init
2 Pre-Operational
3 Bootstrap
4 Safe-Operational
8 Operational
65519 Not Present
16.4.5.3

Device identification

For device identification in the system bus network, the inverter provides the standard Ether-
CAT parameters 0x1018:001
The EtherCAT product code in
activated technology application (0x4000). The last three positions in the product code refer
to the activated technology application.
The 0x2372:009 parameter indicates the functionality of the system bus interface of the inver-
ter (EtherCAT master/slave).
Parameter
Address Name / setting range / [default setting]
0x1018:001 Identity object : Vendor ID
• Read only
0x1018:002 Identity object : Product ID
• Read only
419446784
419479552
419479592
... 0x1018:004.
0x1018:002 consists of device-specific data and the currently
Configuring the network
Info
Display of the initialisation state of the EtherCAT slave.
Display of the device status of the EtherCAT slave.
Info
Display of the manufacturer's identification number.
Display of the product code of the inverter.
EtherCAT system bus
Diagnostics
351