Safety Instructions; Basic Safety Instructions; Application As Directed - Lenze i950 Commissioning Manual

2

Safety instructions

Disregarding the following basic safety measures and safety information may lead to severe
personal injury and damage to property!
Observe all specifications of the corresponding documentation supplied. This is the precondi-
tion for safe and trouble-free operation and for obtaining the product features specified.
Please observe the specific safety information in the other sections!
2.1

Basic safety instructions

Personnel
The product must only be used by qualified personnel. IEC 60364 or CENELEC HD 384 define
the skills of these persons:
They are familiar with installing, mounting, commissioning, and operating the product.
•
They have the corresponding qualifications for their work.
•
They know and can apply all regulations for the prevention of accidents, directives, and
•
laws applicable at the place of use.
Process engineering
The procedural notes and circuit details described are only proposals. It is up to the user to
check whether they can be adapted to the particular applications. Lenze does not take any
responsibility for the suitability of the procedures and circuit proposals described.
2.2

Application as directed

The product must only be operated under the operating conditions prescribed in this doc-
•
umentation.
The product meets the protection requirements of 2014/35/EU: Low-Voltage Directive.
•
Commissioning or starting the operation as directed of a machine with the product is not
•
permitted until it has been ensured that the machine meets the regulations of the EC
Directive 2006/42/EU: Machinery Directive; observe EN 60204−1.
Commissioning or starting operation as directed is only permissible if the EMC Directive
•
2014/30/EU is complied with.
The harmonised standards EN 61800−5−1 and EN 61800−3 are applied to the inverters.
•
The product is not a household appliance, but is only designed as a component for com-
•
mercial or professional use in terms of EN 61000−3−2.
Drive systems comply with categories according to EN 61800−3, if the product is used in
•
accordance with the technical data.
In residential areas, the product may cause EMC interferences. The operator is responsible
•
for taking interference suppression measures.
The product must only be actuated with motors that are suitable for the operation with
•
inverters.
Lenze L-force motors meet the requirements
-
Exception: m240 motors are designed for mains operation only.
-
Safety instructions
Application as directed
17