Options For Optimising The Control Loops; Automatic Motor Identification (Energized) - Lenze i950 Commissioning Manual

13.6

Options for optimising the control loops

The option to be selected depends on the respective application. Depending on the selected
option, different procedures become active and thus different parameter groups are influ-
enced:
Rated motor data
•
Inverter characteristic
•
Motor equivalent circuit diagram data
•
Motor controller settings
•
Speed controller settings
•
Position controller settings
•
13.6.1

Automatic motor identification (energized)

Parameter
Address Name / setting range / [default setting]
0x2832 Motor identification status
• Read only
Bit 0 Identification enabled
Bit 1 Identification active
Bit 2 Identification completed
Bit 3 Identification failed
Configuring the motor control
Options for optimising the control loops
Automatic motor identification (energized)
Info
Display of the status for the automatic identification of the motor
parameters.
Parameters for interaction with engineering tools.
Parameters for interaction with engineering tools.
233