Configuring The Feedback System - Lenze i950 Commissioning Manual

12

Configuring the feedback system

This chapter provides information on how to use feedback systems.
The inverter can be equipped to allow the connection of up to two independent feedback sys-
tems.
Each of the two feedback systems
Is placed in a designated slot in the lower part of the inverter
•
Has an encoder connection on its front side
•
Is an optional equipment feature of the inverter
•
At the time of commissioning, the feedback system is already specified by the hardware of the
respective device version.
Please note that one of two sets of parameters will be effective depending on
which feedback system option has been selected: either the parameters for
resolver evaluation or the parameters for encoder evaluation.
A B
Anschluss Lastgeber
oder Leitgeber
Anschluss Motorgeber
Configuring the feedback system
175