External Master Values - Lenze i950 Commissioning Manual

Configuring the "Electronic Gearbox" TA
Master value sources
Virtual master
7.3.3.3

External master values

The Virtual master control signals parameter can be used to switch over the master value
source when the controller is enabled.
If bit 31 of the Virtual master control signals parameter is set to TRUE, the external master
value sources are deselected. The virtual master takes over the motion control and synchroni-
ses itself via the selected master value source.
Profile calculation parameters:
• Virtual master acceleration
Virtual master deceleration
•
Virtual master jerk
•
40x5046:005
Clutch-in direction virtual master 0x5046:030
•
112
Bit 31
40x5045:010
40x5046:003
40x5046:004