Monitoring - Lenze i950 Commissioning Manual

Assignment of the user data depending on the data type
Depending on the data type used, the user data is assigned as follows:
Data type Length
String x bytes
U8 1 byte
U16 2 bytes
U32 4 bytes
16.3.5

Monitoring

The parameters for setting network monitoring functions are described below.
Parameter
Address Name / setting range / [default setting]
0x2859:001 PROFINET monitoring: Watchdog elapsed
0 No response
1 Fault > CiA402
2 Warning
0x2859:002 PROFINET monitoring: Data exchange exited
0 No response
1 Fault > CiA402
2 Warning
0x2859:003 PROFINET monitoring: Invalid configuration
0 No response
1 Fault > CiA402
2 Warning
0x2859:004 PROFINET monitoring: Initialisation error
0 No response
1 Fault > CiA402
2 Warning
Byte 1 Byte 2
Data 0x00
HIGH byte LOW byte
Data Data
HIGH word
HIGH byte LOW byte
Data Data
Info
Selection of the response to a permanent interruption of the communi-
cation to the IO controller.
Corresponding error code: 33168 | 0x8190 "PROFINET: Watchdog time-
out"
Associated error code:
• 33168 | 0x8190 - RANLI_CIMES_1000_20915
Selection of the response to exiting the "Data Exchange" state.
Corresponding error code: 33171 | 0x8191 "PROFINET: Exit Data
Exchange"
Associated error code:
• 33169 | 0x8191 - RANLI_CIMES_1000_21217
Selection of the response triggered by the reception of invalid configura-
tion data.
Corresponding error code: 33414 | 0x8286 "PROFINET: Configuration
error"
Associated error code:
• 33415 | 0x8287 - RANLI_CIMES_1000_20916
Selection of the response triggered by the occurrence of an error during
the initialisation of the network component.
Corresponding error code: 33170 | 0x8192 "PROFINET: Initialisation
error"
Associated error code:
• 33170 | 0x8192 - RANLI_CIMES_1000_20917
Configuring the network
User data assignment
Byte 3 Byte 4
Data (x bytes)
LOW word
HIGH byte LOW byte
Data Data
PROFINET
Parameter data transfer
Byte ...
337