Subaru Legacy 2004 Service Manual page 1167

MECHANICAL
6) Install the oil pipe.
Tightening torque:
!
29 N m (3.0 kgf-m, 21.4 ft-lb)
7) Connect the oil flow control solenoid valve con-
nector.
8) Install the spark plug cord.
9) Similarly, install the parts on right-hand side.
10) Install the timing belt cover No. 2 (RH).
Tightening torque:
!
5 N m (0.5 kgf-m, 3.6 ft-lb)
Camshaft
11) Install the timing belt cover No. 2 (LH).
Tightening torque:
5 N
ME-00712
12) Install the tensioner bracket.
Tightening torque:
25 N
ME-00808
13) Install the crank sprocket.
<Ref. to ME(H4DOTC)-52, INSTALLATION, Crank
Sprocket.>
14) Install the cam sprocket.
<Ref. to ME(H4DOTC)-51, INSTALLATION, Cam
Sprocket.>
15) Install the timing belt. <Ref. to ME(H4DOTC)-
44, INSTALLATION, Timing Belt.>
16) Install the timing belt cover.
<Ref. to ME(H4DOTC)-42, INSTALLATION, Tim-
ing Belt Cover.>
17) Install the crank pulley.
<Ref. to ME(H4DOTC)-41, INSTALLATION, Crank
Pulley.>
ME-00107
18) Install the V-belts. <Ref. to ME(H4DOTC)-39,
INSTALLATION, V-belt.>
ME(H4DOTC)-56
!
m (0.5 kgf-m, 3.6 ft-lb)
!
m (2.5 kgf-m, 18.1 ft-lb)
ME-00106
ME-00105