Subaru Legacy 2004 Service Manual page 1151

MECHANICAL
15.Timing Belt Cover
A: REMOVAL
1) Remove the V-belts. <Ref. to ME(H4DOTC)-39,
REMOVAL, V-belt.>
2) Remove the crank pulley.
<Ref. to ME(H4DOTC)-41, REMOVAL, Crank Pul-
ley.>
3) Remove the timing belt cover (LH) (A).
4) Remove the timing belt cover (RH) (B).
5) Remove the front timing belt cover (C).
(B)
B: INSTALLATION
1) Install the front timing belt cover (C).
Tightening torque:
&
5 N m (0.5 kgf-m, 3.6 ft-lb)
2) Install the timing belt cover (RH) (B).
Tightening torque:
&
5 N m (0.5 kgf-m, 3.6 ft-lb)
3) Install the timing belt cover (LH) (A).
Tightening torque:
&
5 N m (0.5 kgf-m, 3.6 ft-lb)
(B)
4) Install the crank pulley. <Ref. to ME(H4DOTC)-
41, INSTALLATION, Crank Pulley.>
5) Install the V-belts. <Ref. to ME(H4DOTC)-39,
INSTALLATION, V-belt.>
C: INSPECTION
Check the cover for damage.
Timing Belt Cover
(A)
(C)
ME-00064
(A)
(C)
ME-00064
ME(H4DOTC)-42