Subaru Impreza 2002 Service Manual page 2660

12) Hold the companion flange with ST and remove
the drive pinion nut.
ST 498427200 FLANGE WRENCH
13) Extract the companion flange with a puller.
14) Press the end of drive pinion shaft and extract it
together with the rear bearing cone, preload adjust-
ing spacer and washer.
NOTE:
Hold the drive pinion so as not to drop it.
ST 398467700 DRIFT
REAR DIFFERENTIAL FOR T-TYPE
G3M1052
S3M0511
G3M0074
DI-29
15) Remove the rear bearing cone from drive pin-
ion by supporting the cone with ST.
NOTE:
Place the replacer so that its center-recessed side
faces the pinion gear.
ST 398517700 REPLACER
16) Remove the front oil seal from differential carri-
er using ST.
ST 398527700 PULLER ASSY
17) Remove the pilot bearing together with front
bearing cone using ST.
ST 398467700 DRIFT
(A) Pinion bearing
(B) Front bearing
(C) Rear bearing cup
DIFFERENTIALS
S3M0512A
S3M0513
S3M0514A