Subaru Impreza 2003 Service Manual page 3149

B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be careful not to snag the harness.
NOTE:
• Make sure to connect the harness connector.
• When installing the drain tube, insert it securely
onto drain pipe.
Length A:
15 mm (0.59 in) or more
C: DISASSEMBLY
1) Remove the sunroof frame.
2) Remove the rail stoppers (A).
(A)
3) Pull out the sunshade (A) from sunroof frame.
(A)
SUNROOF ASSEMBLY
A
SR-00065
SR-00066
SR-00067
SR-7
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
D: ASSEMBLY
Assemble in the reverse order of disassembly.
E: INSPECTION
1. CHECK FOR MOVING LOAD OF SUN-
SHADE
1) Attach a spring scale to sunshade edge using a
cloth.
2) Pull the spring scale back to measure moving
load of the sunshade.
Moving load of rear sunshade:
Less than 24.5 ± ± ± ± 4.9 N (2.5 ± ± ± ± 0.5 kgf, 55 ± ± ± ± 1.1 lb)
NOTE:
Moving load is larger at the beginning of pulling a
spring scale, so take a scale reading while sun-
shade sliding smoothly.
3) If moving load exceeds specifications, check the
sunroof lid, sunshade and guide rail assembly for
improper installation.
SR-00068