Subaru Impreza 2003 Service Manual page 3096

SEATS
2) Tighten the bolts.
3) Hook and fasten the seat cushion to the hook on
the lower part of the rear seat backrest.
Tightening torque:
Refer to COMPONENT in General Descrip-
tion. <Ref. to SE-4, REAR SEAT (WAGON
MODEL), COMPONENT, General Descrip-
tion.>
C: DISASSEMBLY
1. WAGON MODEL
1) Remove the rear seat. <Ref. to SE-17, WAGON
MODEL, REMOVAL, Rear Seat.>
2) Remove the hog rings (A) behind of seat back-
rest.
REAR SEAT
SE-00312
SE-00314
: (A)
SE-00026
SE-18
3) Remove the hog rings (A) on front side of cush-
ion pad, and remove the cover.
4) Remove the hog rings (A) beind of seat cushion.
5) Remove the hog rings (A), and then remove the
cover.
2. SEDAN MODEL
1) Remove the rear seat. <Ref. to SE-17, SEDAN
MODEL, REMOVAL, Rear Seat.>
2) Remove two nuts, and then remove the armrest
assembly.
: (A)
SE-00027
: (A)
SE-00028
: (A)
SE-00029
SE-00141