Subaru Impreza 2003 Service Manual page 3131

TRUNK LID LOCK ASSEMBLY
SECURITY AND LOCKS
15.Trunk Lid Lock Assembly
A: REMOVAL
1) Remove the trunk lid key cylinder rod clamp.
2) Loosen two bolts to remove the trunk lid lock as-
sembly.
SL-00189
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Apply grease to parts that rub.
• Make sure the lock works properly after installa-
tion.
C: INSPECTION
1) Check the striker for bending or abnormal wear.
2) Check the safety lever for improper movement.
3) Check other levers and the spring for rust forma-
tion and unsmooth movement.
SL-33