Subaru Impreza 2003 Service Manual page 3132

SECURITY AND LOCKS
16.Front Hood Lock Assembly
A: REMOVAL
1) Open the hood.
2) Remove the bolts. Remove the hood lock as-
sembly.
3) Remove the release cable from lock assembly.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Apply grease to parts that rub.
• Make sure the release cable works properly after
installation.
C: ADJUSTMENT
Loosen the bolt. Adjust the lock assembly while
moving it up and down.
D: INSPECTION
1) Check the striker for bending or abnormal wear.
2) Check the safety lever for improper movement.
3) Check other levers and the spring for rust forma-
tion and unsmooth movement.
FRONT HOOD LOCK ASSEMBLY
SL-00190
SL-00191
SL-34