Subaru Impreza 2003 Service Manual page 3127

11.Rear Door Lock Actuator
A: REMOVAL
1) Remove the rear door latch assembly. <Ref. to
SL-28, REMOVAL, Rear Door Latch Assembly.>
2) Loosen two screws to remove rear door lock ac-
tuator.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the lock works properly after installation.
C: INSPECTION
1) Disconnect the door lock actuator harness con-
nector.
2) Connect the battery to door lock actuator termi-
nals.
If NG, replace the door lock actuator.
1. Without double lock
Terminal No.
No. 3 (+) and No. 1 (–)
No. 1 (+) and No. 3 (–)
REAR DOOR LOCK ACTUATOR
SL-00184
2
1
4 3
SL-00058
Actuator operation
Unlocked → Locked
Locked → Unlocked
2. With double lock
DOOR ACTUATOR RH:
Terminal No.
No. 1 (+) and No. 4 (–)
No. 4 (+) and No. 1 (–)
No. 6 (+) and No. 3 (–)
No. 3 (+) and No. 6 (–)
DOOR ACTUATOR LH:
Terminal No.
No. 6 (+) and No. 3 (–)
No. 3 (+) and No. 6 (–)
No. 1 (+) and No. 4 (–)
No. 4 (+) and No. 1 (–)
SL-29
SECURITY AND LOCKS
3 2
1
6 5 4
SL-00059
Actuator operation
Unlocked → Locked
Locked → Unlocked
Double lock released →
Double lock set
Double lock set → Double
lock released
Actuator operation
Unlocked → Locked
Locked → Unlocked
Double lock released →
Double lock set
Double lock set → Double
lock released