Subaru Impreza 2003 Service Manual page 3175

10) Loosen the bolt and nut, and then remove the
bumper beam from body.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Secure the slider (A) to guide plate (B).
(A)
Tightening torque:
Refer to COMPONENT in General Descrip-
tion.
<Ref. to EI-4, FRONT BUMPER,
COMPONENT, General Description.>
FRONT BUMPER
EI-00439
(B)
EI-00521
EI-23
EXTERIOR/INTERIOR TRIM