Thrust Washers, Shims, And Adjuster S Leeves - GMC T Series 1994 Repair Manual

Figure 12— Removing the Inner Pinion Bearing Cup
F7549
Figure 10— Removing the Pinion Flange
• Low m ileage bearings may have very sm all
scratches and pits on the rollers and the bearing
cups from the initial preload. Do not replace a
bearing for this reason.
THRUST WASHERS, SHIMS, AND ADJUSTER
SLEEVES
Inspect
L*
Shims and thrust washers for cracks and chips.
Dam aged shim s should be replaced w ith an
equal-size service shim.
Adjuster sleeves for damaged threads. Replace if
required.