GMC T Series 1994 Repair Manual page 902

10. Rear Case Half
24. Output Shaft Assembly
27. Output Shaft Bearing Snap Ring
28. Output Shaft Bearing
42. Oil Scoop
Figure 18— Installing the Output Shaft Bearing
Snap Ring
36. Output Shaft Oil Seal
Figure 19— Installing the Output Shaft Oil Seal
7. Planet carrier assembly thrust washer (23) to the
output shaft assembly (24) using petroleum jelly
and align with the input shaft pilot bearing (38).
8. Planet carrier assembly (22) into the ring gear (30).
9. Sun gear shaft thrust washer (21) to the planet
carrier assembly (22) using petroleum jelly (figure
21 ).
10. Sun gear shaft assem bly into the planet carrier
assembly planet gears (22) and align the viscous
clutch teeth (20) to the ring gear spline (30) (figure
22
).
F7608
21. Sun Gear Shaft Thust Washer
22. Planet Carrier Assembly
23. Planet Carrier Assembly Thrust Washer
30. Gear Ring
F7609
Figure 21— Installing the Planet Carrier Assembly
11. Input shaft (19) into the input shaft pilot bearing
(38) aligning the input shaft with the sun gear shaft
thrust washer (21) and the planet carrier assembly
thrust washer (23).
12. Driven sprocket (14) onto the front output shaft (4).
13. Drive chain (13) onto the driven sprocket (14).
14. Drive chain (13) over the drive sprocket (17) and
the front output shaft (4) into the output shaft rear
bearing (39) (figure 23).
15. Front output shaft spacer (12) onto the front output
shaft (4) (figure 24).
30
2 2
7 / 2 3
F7611