Band, Reverse Input Clutch - GMC T Series 1994 Repair Manual

2 BOLT, PUM P TO CASE
3 O-RING, PUM P TO CASE BOLT
4 PU M P ASSEMBLY, OIL
5 SEAL, OIL (PUM P TO CASE)
6 GASKET, PUM P COVER TO CASE
8 CASE, T R A N SM ISSIO N
41 PIN, BAND ANCHOR
601 WASHER, TH RU ST (PUM P TO DRUM )
602 BAND ASSEMBLY, 2-4
605 HO USING A N D D R UM ASSEMBLY, REVERSE INPUT
CLUTCH
621 H OUSING A N D SHAFT ASSEMBLY, INPUT
658 GEAR, INPUT SU N
2-4 Band, Reverse Input Clutch, Input Clutch
And Input Gear Set
Figures 18 through 20
Tools Required:
|<--»| Remove or Disconnect
Figures 18 and 20
1. Reverse input clutch (605) and input clutch
(621) together.
•
2. Band anchor pin (41).
3. The 2-4 band assembly (602).
4. Input sun gear (658).
B
Install or Connect
Figures 19 and 20
• J 29837 as shown.
j 9
•
Figure 19 Output Shaft Support Fixture
Remove or Disconnect
Figure 20
1. Retaining ring (661) with J 34627. Do not
overexpand the ring.
2. Input carrier assembly (662).
RH0117-4L60-E
J 29837 Output Shaft Support Fixture
J 34627 Snap Ring Pliers
Grasp the turbine shaft and lift.
| Important
Output shaft (687) may fall free when
retaining ring (661) is removed if J 29837
is not used.