GMC T Series 1994 Repair Manual page 722

Figure 43 Installing Direct Clutch Piston
□ Install or Connect
Figures 45 through 48
IM P O R T A N T : D ip all clutch plates in
DEXRON®-IIE tran sm issio n flu id prior to
assembling, to aid lubrication during start up.
1. Sprag assembly (624).
2. Intermediate clutch race (625), grooves up, with
clockwise motion. The direct clutch housing
should not rotate counterclockwise.
3. Intermediate clutch retainer (626).
4. Place snap ring (627) over direct clutch hub,
in stall tool J 38695 in hub hole, rotate
counterclockwise while pressing down until snap
ring is in place.
5. Dished plate (609) into direct clutch housing
(623). Inner diameter dish down.
6. Plate assemblies (611) and steel plates (618)
.0915" thickness.
• Alternate plates, starting with steel plate first.
7. Direct clutch backing plate (617) and snap ring (616).
623 HOUSING, DIRECT CLUTCH
624 SPRAG ASSEMBLY, INTERMEDIATE CLUTCH
c n c daz-'c iMTCDKflcniatc r i i iT ru /ni itcd\
l i r A W L - , I I X I 1-1 l l V l L . L / I S 'M I - V / L V / I O l I
626 RETAINER, INTERMEDIATE CLUTCH
627 RING, EXTERNAL LOCKING
Figure 45 Installing Sprag Assembly
I L l l /
RH