PRIMARY RACK PISTON
Figure 1 and 29
Tool Required:
J 21552 Rack Pinion Arbor
Inspect
Worm (33) and rack piston (50) grooves and all balls
(49) for scoring. Replace as a matched assembly.
2
Seal (9) and ring (10) for wear.
.
Ball return guide halves (46) for cracks and damage.
3.
Bearing (35) and races (34) for scoring and exces
4.
sive wear.
Rack piston (50) teeth and external ground surfaces
5.
for scoring or excessive wear. If condition exists,
replace the rack piston (50) and worm (33).
Assemble
*
New Seal (9) and ring (10) to rack piston (50).
1.
•
Lubricate new seal (9) and ring (10) with
power steering fluid.
A-INSTALL BALLS IN THIS
HOLE WHILE SLOWLY
ROTATING WORM
COUNTERCLOCKWISE
B-WORM FLANGE
4 6 -GUIDE, BALL
RETURN
47 - CLAMP
4 8 -SCREWS
49 - BALLS
Figure 27 Placing Balls in the Ball Return Guide
33-SHAFT, WORM
50 - PISTON, (RH) PRIMARY RACK