Fastener Tightening Specifications - GMC T Series 1994 Repair Manual

Install or Connect (Figure 9)
Lubricate seals and cylinder bore with clean brake
fluid.
1. Secondary spring (48).
2. Secondary piston assembly (49).
3. Piston return spring (50).
4. Primary piston assembly (51) and snap ring
(52).
• The primary piston must be depressed to install
the snap ring.
5. O-ring (55) and springs (47).
6. Valve poppets (46) and compensating valve
seals (45).
FASTENER TIG H TENING SPECIFICATIONS
Bendix Reservoir Bolts.
-41
— 42
43
^ 4 4
___ 55
-45
*46
-47
/4 8
Figure 9— Bendix Master Cylinder Components
SPECIFICATIONS
41. Cover
42. Diaphragm
43. Filter
44. Reservoir
45. Compensating Valve Seal
46. Valve Poppet
47. Spring
48. Secondary Spring
49. Secondary Piston
50. Piston Return Spring
51. Primary Piston
52. Snap Ring
53. Body
54. Bolts
55. O-Ring
7. Depress and hold primary piston assembly with
a smooth rounded end tool.
8. Reservoir (44).
NOTICE: Refer to "Notice" on page 5A-1.
9. Bolts (54).
Tighten
a
• Bolts to 18 N-m (13 lbs. ft.).
10. Diaphragm (42) in cover (41).
11. Cover (41).
F0775
N-m Ft. Lbs.
18 13
T2997