Crankshaft Pulley Removal; Crankshaft Pulley Hub Removal - GMC T Series 1994 Repair Manual

feEl Clean
• Coolant pump gasket surfaces.

CRANKSHAFT PULLEY REMOVAL

Figure 11
0
Remove or Disconnect
1. Crankshaft pulley bolts.
2. Crankshaft pulley to hub bolt.
3. Remove pulley.
CRANKSHAFT PULLEY HUB
REMOVAL
Figure 11
Tools Required:
J 24420-B Crankshaft Pulley Hub Puller
0
Remove or Disconnect
1. Install Tool J 24420-B on hub; turn puller screw
and remove hub.
CRANKCASE FRONT COVER
REMOVAL
Figure 12
|<"»| Remove or Disconnect
1. Front cover bolts.
2. Front cover. If difficult to remove, use a rubber
mallet to loosen cover.
Figure 7 - Accelerator Cable Bracket and MAP Sensor
UPPER INTAKE MANIFOLD ASSEMBLY
NUT
BOLT
ACCELERATOR CABLE BRACKET
MAP SENSOR BOLT
MAP SENSOR
SEAL
1 MANIFOLD
2 GASKET, EXHAUST MANIFOLD
3 STUD
4 CYLINDER HEAD ASSEMBLY
5 NUT (8)
N30011 — 6A2— J— EDS
7 FRONT
4 OF
^ ENGINE
SR200LN2— EDS