GMC T Series 1994 Repair Manual page 903

Figure 22— Installing the Sun Gear Shaft Assembly
16. Magnet (15) to the rear case half (10).
17. Apply an 1/8-inch bead of RTV sealer (GM P/N
1052366) or equivalent to the rear case half (10)
front cover sealing surface.
18. Front cover (11) and front cover bolts (9) to the
rear case half (10).
4. Output Shaft
12. Front Output Shaft Spacer
Figure 24— Installing the Front Output Shaft Spacer
Tighten
• Front cover bolts (9) to 42 N-m (30 ft. lbs.).
19. Front output shaft oil seal (31) to the front cover
(11) using J 37668.
20. Input shaft oil seal (32) using J 38216.
21. Front output flange (5) to the front output shaft (4)
(figure 25).
22. Rubber sealing washer (3), steel flat washer (2),
and a new front output flange nut (1).
Tighten
F7636