3. Solenoid
31. Drive Housing
41. End Frame
51. Field Coil Connection
Figure 4— Light Duty Starter Motor
1. Shift Lever Finger
9. Armature
31. Drive Housing
39. Drive Collar
Figure 5— Disengaging the Drive Collar from the
Shift Lever Fingers
3. Screws (36) attaching the solenoid (3) to the drive
housing.
4. Lever shaft (43), nut (44), and washer.
5. Shift lever (1) and the attached solenoid plunger
(2) from the drive housing.
6. Roll pin (40) in order to separate the shift lever
from the solenoid plunger (2).
57. Field Frame
58. Through Bolts
F9322
F4215
Ring
BRUSHES
Disassemble (Figure 8)
❖
1. Brush holder pivot pins (63).
2. Brush springs (64).
3. Brushes (33) from the brush holders.